Repair Kits & Parts for Watts Backflow Preventers
In Stock
This complete repair kit is designed to restore the performance and reliability of compatible backflow preventers by replacing critical internal components that experience wear during normal operation.
New
Self-Lubricating Spherical Bearings
In Stock
These spherical bearings have a PTFE-lined raceway that is self-lubricating and provides a sliding surface to reduce wear on the bearing.
$145.00
New
General Purpose Spherical Bearings
In Stock
These spherical bearings are for general purpose applications to support two-direction rotation and misalignment of the shaft and housing under high load at slow speeds.
$140.00
Dirt- & Dust-Resistant Plastic Sleeve Bearings
In Stock
These dry-run plastic sleeve bearings are resistant to dirt and dust. They're for use in environments where contaminants are a concern, such as agriculture machinery, construction equipment, and automotive manufacturing.
$160.00
New
General Purpose Radial Ball Bearing
In Stock
These radial ball bearings are intended for general purpose applications that operate at high speeds with low loads. They have a single row of ball rollers for radial loads, but can support some axial movement.
$105.00
New
Repair Kits & Parts for Zurn Backflow Preventers
In Stock
These repair kits and parts keep Zurn backflow preventers in working condition. It is an ideal solution for routine maintenance, inspection, and repair of backflow prevention systems.
General Purpose Plastic Sleeve Bearings
In Stock
These dry-run plastic sleeve bearings are for general purpose applications and produce a low coefficient of friction, resist abrasion and wear, and operate quietly.
$95.00
Corrosion-Resistant Radial Ball Bearing
In Stock
These radial ball bearings are stainless steel to resist rust and corrosion. They are for use in pharmaceutical and marine applications where they are exposed to chemicals and salt water.
$140.00
New
Silicone O-Rings
In Stock
Silicone O-rings resist UV rays, dry heat, and high aniline-point oils. They are durable, flexible, and suitable for applications in outdoor areas.
$100.00
New
Safety Relief Valve
In Stock
Steam pressure-relief valves comply with ASME Section I codes, which certifies they are built to comply with minimum industrial safety standards and that they offer protection against overpressure conditions in pressurized equipment. These valves pair with power boilers used in commercial and industrial applications.
$395.00
New
Hex Machine Screw Nut
In Stock
Machine screw hex nuts fasten onto machine threaded fasteners in low-to-medium load applications. They are generally used for male fasteners that are less than 3/4" in diameter with uniform threads throughout their length.
$100.00
New
Panel Nut
In Stock
Panel hex nuts are thinner and much shorter than regular hex nuts. They mate with male-threaded components that are inserted through flat surfaces and secured into place.
$110.00
New
RENEWABLE LUBRICANTS General Purpose Lubricant
In Stock
These lubricants have a renewable base ingredient such as plant-derived oil or water. Renewable-based lubricants have less environmental impact and are safer to handle than other lubricants.
$625.00
New
3-IN-ONE General Purpose Lubricant
In Stock
Petroleum-based lubricants are refined from crude oil and are more economical than other lubricants for keeping parts moving smoothly and reducing friction and wear in applications without extreme temperatures.
$140.00
New
3M General Purpose Lubricant
In Stock
Silicone-based lubricants withstand dramatic temperature changes and maintain their stability over time without breaking down or evaporating compared to petroleum- and renewable-based lubricants. They are highly resistant to moisture and work on a wide variety of materials
$100.00
DAYTON DC Gearmotor Component Motor
Low Inventory
Low Inventory
DC gearmotor component motors consist of a motor and an integrated series of gears or a gearbox to customize output speed and torque to meet a specific requirement. They allow for compatible gearboxes to work with the same motor. The motors have a totally enclosed nonventilated (TENV) enclosure that doesn't have an external cooling fan and depends on convection air for cooling, making them suitable for fans and blowers in HVAC applications.
$216.60
LEESON Washdown Motor C-Face
Low Inventory
Low Inventory
Stainless steel washdown DC motors are for use in wet/high-humidity environments and have a stainless steel motor shell that resists rust and corrosion. They are commonly used where sanitation procedures with hot pressurized water and cleaning solutions are performed several times each day.
$3,440.04
LEESON Washdown Motor
In Stock
Painted epoxy coated washdown DC motors are for use in wet/high-humidity environments and have a USDA-approved paint finish that is safe for use in food processing applications. They are commonly used where sanitation procedures with hot pressurized water and cleaning solutions are performed several times each day.
$1,614.78
DAYTON DC Permanent Magnet Motor
In Stock
These HVAC/R DC motors are used where variable speed and high torque are required in HVAC applications, such as with mobile home and RV ventilation or pumps, and with automotive heaters or air conditioners.
$155.87
LEESON Hazardous Location Motor
In Stock
These hazardous location DC motors are rated as Class I, Division 2, Groups C and D for use in atmospheres with a high presence of substances such as ethylene, gasoline, and ethanol, and they are rated Class II, Division 2, Groups F and G for use in areas where dust from materials such as coal, grain, and flour may be present. These motors have sturdy enclosures with thick walls and long flanges where the end bells and the frame meet. They have field wiring that must be completed in a separate or attached wiring compartment that has the same hazardous location class and group standards as the motor.
$3,867.66
LEESON DC Permanent Magnet Motor
In Stock
These general purpose DC motors have a NEMA frame designation with standard dimensions which allows for drop-in replacement of motors from multiple suppliers with no modifications required to existing installations.
$1,082.50